| 编号 | 中文名称 | 英文名称 |
|---|
| DIN 1158-1973 | 钩钉 | Hook nails |
| DIN 11860-1954 | 乳品机械.压力接头用钩形扳手 | Dairying machines; hook spanners for compression fittings |
| DIN 12895-2-1978 | 金属实验室仪器.钩形连接件 | Metal laboratory ware; hook connector |
| DIN 13122-2005 | 医疗器械.1 1带齿直式钩钳 | Medical instruments – Tenaculum forceps 1 × 1 teeth, straight |
| DIN 14851-1988 | 顶棚吊钩 | Ceiling hook |
| DIN 15105-1985 | 起重设备用吊钩.带环单钩 | Lifting hooks for lifting appliances; point hooks with collar |
| DIN 15106-1982 | 提升吊钩.简单承载吊钩的卡子 | Lifting hooks; safety catch for simple load hook |
| DIN 15400-1990 | 起重吊钩.材料、机械特性、承载能力和应力 | Lifting hooks; materials, mechanical properties, lifting capacity and stresses |
| DIN 15401-1-1982 | 提升设备用起重钩.单钩.毛坯件 | Lifting hooks for lifting appliances; Single hooks; Unmachined parts |
| DIN 15401-2-1983 | 起重机用吊钩.单钩.带螺纹轴的成品件 | Lifting hooks for lifting appliances; Single hooks; Finished parts with threaded shank |
| DIN 15402-1-1982 | 起重机用吊钩.（Ramshorn hooks）双钩.毛坯件 | Lifting hooks for lifting appliances; Ramshorn hooks; Unmaschined parts |
| DIN 15402-2-1983 | 起重机用吊钩.（Ramshorn hooks）双钩.带螺纹轴的成品 | Lifting hooks for lifting appliances; Ramshorn hooks; Finished parts with threaded shank |
| DIN 15403-1969 | 起重机的提升吊钩.圆螺纹 | Lifting Hooks for Hoists; Knuckle Threads |
| DIN 15404-1-1989 | 起重机吊钩.锻制吊钩交货技术条件 | Lifting hooks; technical delivery conditions for forged hooks |
| DIN 15404-2-1988 | 起重机吊钩.轧制吊钩交货技术条件 | Lifting hooks; technical delivery conditions for laminated hooks |
| DIN 15405-1-1979 | 起重机用吊钩.第1部分:使用中锻制吊钩的检验 | Lifting hooks; inspection of forged hooks in service |
| DIN 15405-2-1988 | 起重机吊钩.轧制吊钩使用中检查 | Lifting hooks; In-service inspection of laminated hooks |
| DIN 15406-1969 | 起重吊钩.手工锻制吊钩的描绘，指令 | Lifting hooks; tracing of hand forged hooks, directives |
| DIN 15407-1-1977 | 起重机用吊钩.第1部分:插口铁水包、组件用带测点的叠层吊钩.主要尺寸 | Lifting hooks; laminated hooks with a point for spigot ladles, assembly, principal dimensions |
| DIN 15407-2-1989 | 插口铁水包叠层铆合式单钩.第2部分:部件 | Laminated point hooks for spigot ladles; components |
| DIN 15411-1983 | 提升设备.下滑车的提升吊钩悬吊装置 | Lifting appliances; lifting hook suspensions for bottom blocks |
| DIN 15413-1983 | 起重机的下滑车.提升吊钩螺母 | Bottom blocks for lifting appliances; lifting hook nuts |
| DIN 1804-1971 | 钩形扳手用开槽圆螺母.ISO米制细牙螺纹 | Slotted Round Nut for Hook Spanner; ISO Metric Fine Thread |
| DIN 1810-1979 | 钩形扳手 | Hook wrenches |
| DIN 20044-2003 | 液压动力传输管路用S型钩环锁定联接器.尺寸、要求和试验 | Staple-lock couplings type S for hydraulic power-transmission circuits – Dimensions, requirements, testing |
| DIN 20583-1995 | 矿车.钩环型连接器 | Mine cars – Shackle coupling |
| DIN 20619-1993 | 矿山用悬架单轨道.带悬挂钩的卷绳滚筒.尺寸和要求 | Suspended monorails for mining; winding-drum with suspension hook; dimensions and requirements |
| DIN 20635-2001 | 矿山单轨架空道.悬挂钩环 | Monorails for mining – Suspensions shackles |
| DIN 22253-1987 | 链式连接器.链钩型连接器装置.尺寸、要求、检验 | Chain connectors; shackle type connector units; dimensions, requirements, testing |
| DIN 30389-2007 | 动力装置螺旋扣和牵引挂钩用带圆螺纹的六角螺母和槽顶螺母 | Hexagon and castle nuts with knuckle thread – For motive power units turnbuckles and drawbars |
| DIN 34300-2001 | 救护设备.带绳环的救护钩 | Rescue equipment – Rescue hooks with safety eyelet holes |
| DIN 4000-152-2006 | 产品特性表设计.第152部分:扳手.机工扳手、套筒扳手、钩形板手、插销扳手 | Tabular layouts of properties – Part 152: Wrenches – Engineers wrenches, box wrenches, hook wrenches, pin wrenches |
| DIN 43167-2-1987 | 工作电压为交流1000V以下、直流1500V以下架空接触线用棒式绝缘子.帽、U型螺栓和钩头螺栓 | Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c.; caps, u-bolts and hook bolt |
| DIN 462-1973 | 机床.按DIN 1804钩形扳手用开槽圆螺母的内舌垫圈 | Machine Tools; Internal Tab Washers for Slotted Round Nuts for Hook Spanner according to DIN 1804 |
| DIN 46262-4-1988 | 低压用螺栓接线柱.第4部分:开口环、.钩环、垫圈、垫片 | Low-voltage stud-terminals; snap rings, shackles, washers, shims |
| DIN 48055-3-1971 | 通信架空线路用绝缘子心轴.钩型心轴 | Insulator spindles for telecommunication overhead-lines; hook-shaped spindles |
| DIN 48154-1-1959 | 架空电力线.第1部分:S形挂钩绝缘子.绝缘体 | Power current overhead lines; shackle insulators S, insulator bodies |
| DIN 48154-2-1959 | 架空电力线.第2部分:S形挂钩绝缘子.弓形件 | Power current overhead lines; shackle insulators S, bows |
| DIN 48319-1962 | 带钩螺钉 | Hook screws |
| DIN 49781-1965 | 街道照明器用蹬形挂钩. | Suspension stirrup for street lighting fittings |
| DIN 49980-1976 | 照明设备.屋顶挂钩.顶棚罩 | Luminaires; ceiling hooks, ceiling cups |
| DIN 5046-1983 | 肉和其它食品用悬钩.S钩 | Hooks for meat and other foods; S-hook |
| DIN 5047-1983 | 肉和其它食品用的悬挂钩.管轨滑动挂钩 | Hooks for meat and other food; tubular track sliding hook |
| DIN 5048-1984 | 肉和其它食品用悬挂钩.管轨滚子挂钩 | Hooks for meat and other food; tubular track roller hook |
| DIN 51302-2-2000 | 材料试验机.拉伸.加压和弯曲试验机的检验.建筑材料压力试验机的钩检验 | Materials testing machines – Strain cylinder test method for compression testing machines for concrete |
| DIN 5287-1972 | 单件制单钩弹簧钩 | Simplex hook spring hooks made of one piece |
| DIN 5289-1979 | 剪刀形弹簧保险钩 | Scissors snap |
| DIN 5290-1-1983 | 有锁紧螺母的轻金属弹簧钩.尺寸、要求、检验 | Snap hook from light metal; with setting nut; dimensions, requirements and testing |
| DIN 5297-2-1979 | 带固定圆环和椭圆环的弹簧锁钩 | Spring snap with fixed round eye and oval eye |
| DIN 5299-1980 | 半圆钢丝、圆钢丝及锻造的弹簧保险钩 | Snap hook half-round wire, round wire and forged |
| DIN 5406-1993 | 滚动轴承.锁紧垫圈.止动钩平垫圈 | Rolling bearings; lockwashers; safety plate, lockclip |
| DIN 5683-2-1966 | 浮标锚链卸扣、锚转环和转钩 | Buoy chains shackles, swivels, swivel hooks |
| DIN 5688-1-1986 | 带钩式或环式端配件的5级链式吊索 | Grade 5 chain slings with hook or ring type terminal fittings |
| DIN 5699-1994 | 传动带输送机用U型链节（U形钩环） | Chain U-links (shackles) for conveyors |
| DIN 58288-1983 | 医疗器械；Langenbeck式伤口拉钩 | Medical instruments; retractor type Langenbeck |
| DIN 58292-1972 | 医疗器械；气管钩 | Medical instruments; tracheal hook |
| DIN 58295-1983 | 医疗器械；Volkmann式骨科用拉钩 | Medical instruments; retractor type Volkmann |
| DIN 58805-1-1972 | 骨髓插钉用器械.第1部分:螺纹式拔钉钩 | Instruments for intramedullary nailing; extracting hook with thread |
| DIN 62150-1977 | 圆型纬编机用钩针.圆形挂综杆 | Spring bearded needles for circular weft knitting machines; round shank |
| DIN 62151-1977 | 圆型纬编机用钩针.扁平有槽挂综杆 | Spring bearded needles for circular weft knitting machines; flat groove shank |
| DIN 62154-1976 | 钩针成形平机的沉降片.术语和定义 | Sinkers for straight bar knitting machines; terms and definitions |
| DIN 68856-4-1983 | 家具用五金件.家具装配附件术语.闩、挂钩.调节器 | Hardware for furniture; terms for furniture fittings; holding devices, flap stays, lid stays |
| DIN 695-1986 | 带钩式或环式端配件的2级链式吊索 | Grade 2 chain slings with hook or ring type terminal fittings |
| DIN 72786-1-2001 | 公路车辆风挡刮水器系统.弧刷臂.第1部分:挂钩固定用A型刮水器刮板 | Windscreen wiper systems for road vehicles – Wiper arm – Part 1: Type A wiper blades for hook fastening |
| DIN 74053-1-1994 | 牵引车和拖车之间的机械连接件.50 mm 牵引车挂钩孔眼.第1部分:带衬套 | Mechanical connections between towing vehicles and trailers – 50 mm drawbar-eye – Part 1: With sleeve |
| DIN 74054-1-1989 | 牵引车和挂车的机械连接.第1部分:带套筒的 40 mm 牵引车挂钩眼 | Mechanical connections between towing vehicles and trailers; 40 mm drawbar-eye with sleeve |
| DIN 74080-1984 | 铰接式汽车列车的挂钩装置.50半挂车的转盘接合.功能和安装尺寸、要求 | Coupling devices for articulated road trains; 50 semi-trailer fifth wheel coupling pin; functional and mounting dimensions, requirements |
| DIN 74083-1984 | 铰接式汽车列车的挂钩装置.90半挂车的转盘接合.功能和安装尺寸、要求 | Coupling devices for articulated road trains; 90 semi-trailer fifth wheel coupling pin; functional and mounting dimensions, requirements |
| DIN 7540-1980 | 5级环钩. | Eye hooks, grade 5 |
| DIN 7541-1984 | 提升设备.大孔环挂钩.5级 | Lifting appliances; large-eye hooks; grade 5 |
| DIN 81310-2003 | 船上推拉门带钩头弹簧闩的弹簧锁 | Rim-locks with hook latch-bolt for sliding doors on ships |
| DIN 81404-1977 | 门钩用悬挂门扣 | Suspension catch for door hooks |
| DIN 81405-1978 | 门钩和门钩环 | Door hooks and corresponding eye |
| DIN 81406-1977 | 活板门用自落式门钩 | Door-fallhook for trap-doors |
| DIN 81407-1978 | 衣夹、窗帘钩、毛巾钩 | Clothes-pegs, curtain hooks, towel hooks |
| DIN 81408-1978 | 带螺纹钩 | Screwing-hooks |
| DIN 81420-1977 | 钢制门钩 | Door hooks, made of steel |
| DIN 82017-1991 | 货物吊钩 | Cargo hooks |
| DIN 82018-1990 | 船货吊钩转环 | Cargo hook swivels |
| DIN 82019-1993 | Ramshorn 螺纹杆钩.带双耳和带孔眼的米制螺纹杆 | Ramshorn shank hooks; shank with metric thread, with double lug and with eye |
| DIN 82101 Berichtigung 1-2006 | 提升、拖引、捆索用元件.D形钩环.非合金优质钢.DIN 82101-2005的技术勘误 | Components for lifting, towing, lashing – Shackle, dee – Non-alloy quality steel, Corrigenda to DIN 82101:2005-09 |
| DIN 82101-2005 | 提升、拖引、捆索用元件.D形钩环.非合金优质钢 | Components for lifting, towing, lashing – Shackle, dee – Non-alloy quality steel |
| DIN 82102-2005 | 提升、拖引、捆索用元件.D形钩环.不锈钢 | Components for lifting, towing, lashing – Shackle, dee – Stainless steels |
| DIN 82103-2005 | 提升、拖引、捆索用元件.弓形钩环.不锈钢 | Components for liftig, towing, lashing – Shackle, bow – Stainless steels |
| DIN EN 1147 Bb.1-2003 | 符合DIN EN 1147的消防队用便携式梯子.消防梯、挂钩梯、伸缩梯、组合梯、承窝件和多功能梯 | Portable ladders for fire brigade in accordance to DIN EN 1147 – Stick ladder, hook ladder, extending ladder, sectional ladder, socket part, multifunction ladder |
| DIN EN 1381-2000 | 木结构.试验方法.承重的钩环接合.德文版本EN1381:1999 | Timber structures – Test methods – Load bearing stapled joints; German version EN 1381:1999 |
| DIN EN 13889-2003 | 一般提升用锻钢带销U形环.固定D形环钩和弓形环钩. 6级要求 | Forged steel shackles for general lifting purposes – Dee shackles and bow shackles; Grade 6 – Safety; German version EN 13889:2003 |
| DIN EN 15020-2007 | 铁路设施.救援设备车钩.性能要求、专用联结几何尺寸和试验方法 | Railway applications – Rescue coupler – Performance requirements, specific interface geometry and test methods; English version of DIN EN 15020:2007-02 |
| DIN EN 1677-2-2000 | 吊索元部件..第2部分:8级锻钢制带卡齿吊钩 | Components for slings – Safety – Part 2: Forged steel lifting hooks with latch, grade 8; German version EN 1677-2:2000 |
| DIN EN 1677-3-2002 | 吊索元部件.性.第3部分:8级锻钢制自锁吊钩 | Components for slings – Safety – Part 3: Forged steel self-locking hooks, grade 8; German version EN 1677-3:2001 |
| DIN EN 1677-5-2001 | 吊索元件.性.第5部分:带闩锁的锻压钢提升钩,4级 | Components for slings – Safety – Part 5: Forged steel lifting hooks with latch, Grade 4; German version EN 1677-5:2001 |
| DIN EN 2591-6414-2003 | 航空航天系列.光电连接件.试验方法.第6414部分:光学元件.脱钩拉索式光学连接件的失配性 | Aerospace series – Elements of electrical and optical connection; Test methods – Part 6414: Optical elements; Unmating of lanyard release optical connection elements; German and English version EN 2591-6414:2001 |
| DIN EN 517-2006 | 屋顶预制附件.屋顶吊钩 | Prefabricated accessories for roofing – Roof safety hooks English version of DIN EN 517:2006-05 |
| DIN EN 846-8-2006 | 砖石工程辅助元部件试验方法.第8部分:搁栅吊钩载荷能力和加载变形特性测定 | Methods of test for ancillary components for masonry – Part 8: Determination of load capacity and load-deflection characteristics of joist hangers(includes Amendment A1:2006); English version of DIN EN 846-8:2006-10 |
| DIN ISO 11406-1995 | 商用道路车辆.带尾部连接器的牵引车辆和挂钩挂车间的机械连接器.互换性 | Commercial road vehicles – Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers – Interchangeability; identical with ISO 11406:1993 |
| DIN ISO 11825-1999 | 纺织机械和附件.编织机用舌型针.针杆宽度和钩针高度的调整 | Textile machinery and accessories – Latch-type needles for knitting machines – Coordination of shank widths and hook heights (ISO 11825:1995) |
| DIN ISO 2331-1983 | 叉车.挂钩型货叉.词汇 | Fork lift trucks, hook-on type fork arms; vocabulary |
| DIN ISO 8119-2-1990 | 纺织机械和附件.针织机针.术语.第2部分:钩针 | Textile machinery and acessories; neddles for knitting machines; terminology; bearded needles; identical with ISO 8119-2:1989 |
| DIN V 74053-10-1989 | 牵引车和拖车之间的机械连接件.第10部分:带衬套的 50 mm 牵引车挂钩孔眼与轴挂车使用的附加规范 | Mechanical connections betweeen towing vehicles and trailers; drawbar eye 50 with sleeve; additional specifications for applications on centre axle trailers |
| DIN V 74054-10-1989 | 牵引车和拖车之间的机械连接件.第10部分:带衬套的 40 mm 牵引车挂钩孔眼与轴挂车使用的附加规范 | Mechanical connections between towing vehicles and trailers; drawbar eye 40 with sleeve; additional specifications for applications on centre axle trailers |
| DIN V 81851-1999 | K4 级锚链钢缆.斜连接钩环 | Anchor chain cables grade K4 – Kenter type joining shackles |
